-
Last Updated: 02/23/2016
in How To's
Below are instructions to back up the SightLogix SightMonitor database.
In SightMonitor, select "Edit" > "Backup data base now"
Once done, should have a new directory in
C:\Program File...
-
Last Updated: 09/03/2015
in How To's
Follow these instructions to swap an existing SightTracker that is in need of replacement.
Make note of the serial number of the new Sight Tracker
Set networking IP addrerss, gateway, mask and NTP on new Sight Tracker to same sett...
-
Last Updated: 09/03/2015
in Troubleshooting
Overview:
3rd Generation SightLogix devices do not presently support auto network line reversal negotiation.
Solution
If a SightLogix device is running and the network cable is disconnected and re-connected directly to ...
-
Last Updated: 09/13/2018
in How To's
When you perform a GPS Map calibration with a SightSensor, you need a site map that represents your actual location. SightLogix can often provide this for you, but sometimes a custom site map is not available when your product ships. In this c...
-
Last Updated: 04/11/2018
in General Information
3rd Generation SightSensors provide an LED indicator which is used to describe boot progress. Normal LED Progression After applying power to a c amera, the normal LED sequence is: Solid Red The camera has power and is try...
-
Last Updated: 10/22/2021
Product Datasheets Datasheets are available on the SightLogix public website, here . More Resources Follow SightLogix on LinkedIn! https://www.linkedin.com/company/sightlogix/ White Papers White papers are available on the SightLogix pu...
-
Last Updated: 01/12/2017
in General Information
SightLogix announced the End of Life (EOL) for Second Generation (Gen2) SightSensors in May, 2015. In response, we have created a cost-effective Gen2 to Gen3 Upgrade Program for customers who would like to replace their existing Gen2 SightSe...
-
Last Updated: 04/27/2017
in How To's
Follow these instructions when replacing an existing 3rd Gen SightSensor for a new SightSensor that ends with -x20 part numbers. You can find your part number on the sticker outside of your new SightSensor. Note that newer 3 rd Generation Si...
-
WebConfig was designed to make setting up a SightSensor quick and easy. Here's an overview of the features and functions of the WebConfig interface. Live Camera Snapshot on the Login Page When you enter your SightSensor's IP addr...
-
Last Updated: 09/11/2018
in How To's
If a SightLogix device is powered up on a network with dynamic addressing (DHCP service), it may be difficult to find which IP address has been assigned to a particular device. In this case, you can use ONVIF Device Manager (ODM ) to discover the IP...