SightTracker F or information about setting up a SightTracker with compatible IP PTZ, refer to the SightLogix Enterprise Security System Guide . SightTracker Supported PTZ List Configuring SightTrackers with Analog Cameras VMS Instru...
Last Updated: 09/18/2019
Here are some helpful resources for getting started with the SightLogix SightSensor system. Guided Set-up Videos Click here for step-by-step videos for installing a SightSensor User Documentation Installation Checkli...
User Documentation SightMonitor Installation Guide (Release 15.x) SightLogix Enterprise Security System Guide Release Note - Release 15.6 SightMonitor Quick Reference Previous Releases Archive Datasheets are available o...
These videos will guide you through each step of your SightLogix installation, from unboxing your system to installing software, calibrating your camera, and creating and testing video analytic rules. You will also find a helpful ...
Last Updated: 10/17/2018 in Documentation
Product Drawings SightSensor Wiring Overview (PDF) SightSensor Wiring Overview (DWG) SightSensor Dimensions Overview (PDF) SightSensor Dimensions Overview (DWG) SightSensor HD Dimensions Overview (PDF) SightSensor HD Dime...
Last Updated: 03/12/2019 in How To's
There are two methods for upgrading SightLogix devices: Using the browser-based WebConfig or the Windows-based SightMonitor application. Following the instructions for your chosen method below. Upgrading Firmware with WebConfig Updatin...
Last Updated: 09/03/2015 in How To's
Follow these instructions to swap an existing SightTracker that is in need of replacement.
Make note of the serial number of the new Sight Tracker
Set networking IP addrerss, gateway, mask and NTP on new Sight Tracker to same sett...
Last Updated: 06/25/2019 in General Information
Please note: This information applies to 3rd Generation SightSensors only. 3rd Generation SightSensors ship with DHCP enabled with the assumption that there is a DHCP server on the network. If no DHCP service is detected after approximately o...
Last Updated: 02/23/2016 in How To's
Below are instructions to back up the SightLogix SightMonitor database.
In SightMonitor, select "Edit" > "Backup data base now"
Once done, should have a new directory in
Last Updated: 09/11/2015 in How To's
Note: These instructions are for SightMonitor version 10.6.21. Please verify that your installed SightSensor firmware is 10.6.74 using the Upgrade Firmware command in Sight Monitor.
Install the Mozilla browser which is used to d...